2-2010
Magazine "ÓÏÀÊÎÂÊÀ" (packaging) — 2/2010PersonalityPackaging - is forever MarketModeling of economic performance of corrugated cardboard
G.I. Dolinskaya, Zhydachiv PPF, V.N. Moroz, Dr., JSC Institute of Paper, V.V. Milenkiy, Dr., NTU KPI
In the article using the developed program authors assume different versions of the technologically best and cost-effective compositions. The authors conducted a research on the impact of paper and paperboard mass of 1 m2 of the quality of corrugated cardboard. Also in the set linear dependence of the resistance to compression of corrugated cardboard face-end of the mass 1 m2 of fluting and the face-end figure of resistance to compression, thus confirming the validity of amendments made to the formula.
ExhibitionsPack Expo 2009 - the tenth step (reflection during and after the exhibition)
V.N. Kryvoshey, Ph.D., IAC «Upakovka», Kiev Club packagersI know the competiton is!
O.Y. Kulishova, Club packagers, Kiev MarketMoment of truth or what to do during the crisis
G.L. Ryabtsev, Dr., I.A. Mikulonok, Dr., Y.M. Kornienko, Dr., National Technical University of Ukraine «KPI», Kyiv
The article provides analysis of the emergence of modern financial and economic crisis, compared with Kondratyev’s studies of cyclical development of world economy.
The authors identified the tactic recommendations for the business of packing and other industries, primarily, toward reducing costs for lower prices on goods and services and increase the margin to preserve profits. The article contains suggestions for strategic actions of different levels of efficiency for different segments of market maturity. The authors reviewed the options for improving the efficiency of companies during the crisis due to a direct or indirect costs. ExhibitionThe future of packaging is born today Club packagersCompetition as a mirror of the packaging market in Ukraine
O.Y. Kulishova, Club packers, Kiev MaterialTrends in the world market of biodegradable polymers
E.V. Shibirin, Dr., O.D. Fedoryak, Dr., Institute of Bioorganic Chemistry and Petrochemistry, NAS of Ukraine, P.V. Zamotaev, Dr., CG Consulting, Kiev
The article shows the main causes of the global development of biodegradable polymers. To define the term «biodegradation» in developed countries there are specific standards.
The authors identified and reviewed three main ways development of biodegradable polymers:
• partial modification of natural polymers (eg starch);
• obtaining monomers by chemical means or fermentation followed by polymerization;
• production of micro-organisms or genetically modified crops.
It is shown that in the near future the world will increase significantly the production of biodegradable polymers subject to reorganization of the recycling infrastructure. Cation glues’ influence on cellulose fibers
L.P. Antonenko, Dr., A.D. Bilan, T.A. Butmarchuk, D.N. Skladanny, Dr., National Technical University of Ukraine KPI, Kiev
With the aim of investigation of cation glues’ influence on shallow fiber retaining on the net, the influence of starch glues such as ÊÓ-1 and ÊÄ-2 received in the laboratories, on leaf wood cellulose fiber was researched. The obtained results confirm the fact that these glues give the possibility to receive casts with parameters which overcome of that ones received with the use of Zhukovsky glue, not worse than samples produced with the ceresan glue. Optimization of composition of the fibrous intermediate products for the manufacture of fluting
R.I. Cherepkina, Dr., V.G. Ploskonos, Dr., NTU KPI, Kiev
The article shows how to use the methodology of application of mathematical models to determine the optimal composition fluting. The authors determined the ratio of high-yield pulp, cellulose of poplar wood in the composition of waste paper for paper grades B-0, B-1, B-2. Investigation of paper formative properties of peracetic cellulose from rape straw
I.M.Deykun, Dr., V.V.Poyda, V.À.Barbash, Dr., National Technical University of Ukraine KPI, Kiev
Microscopic structure of rape straw and cellulose obtained from rape straw by pulping with the liquor of peracetic acid was investigated. Fractional content of peracetic cellulose from rape straw by fiber length was defined. It was found out that physical-mechanical indexes of peracetic cellulose from rape straw near to sulfate bleached cellulose from soft wood.
Packaging
Retort-packages: fashion or necessity?
G.L. Ryabtsev, Dr., I.O. Mikulenok, Dr., National Technical University of Ukraine Kiev Polytechnic Institute
The article is given extensive information about the new form of packaging — Retort-packages. The authors tell about history and the need for an innovative packaging. Also reviewed terminology, typology retort-packages, their advantages and the main directions of application. The article reports the features of the technology and equipment for the packaging of products in retort-packages, their sealing sterilization. However, given the problem of implementation of such a package and prospects for its appearance on the Ukrainian market. Packaging for canned products
(status and prospects)
V.N. Krivoshey, Dr., IAC Upakovka, Kiev
The article presents an analysis of the Ukrainian market of fruits and vegetables and canned meat, canned fish and preserves. The author identified trends of each type of canned food, packaging analyzed for canning. Based on the structure and parameters of the packaging for the canned goods to calculate the quantity of consumer and transport packaging, auxiliary packaging means and packaging materials for their manufacture.
EquipmentSystem analysis of energy consumption in group packing equipment
V.V. Khalaydzhi, IAC Upakovka, A.N. Gavva, Dr., S.V. Tokarchuk, Dr., National University of Food Technologies, Kiev
In this article, the authors based on analysis of packaging technologies group developed a generalized graph of the packing operation, and on the basis of mass and energy flows - energy graphs.
Based on the analysis of energy graphs authors found the ratio of energy consumption by different functional modules of the group of packing machines and ways to improve them in order to minimize overall energy consumption. Inverters Altivar 312 - reliability and versatility
Y. Karpus, Ltd. Schneider Electric Ukraine Energy transformation in the technological lines of packaging machines
S.O. Pavlov, A.I. Sokolenko, Dr., K.V. Vasilkovsky, Dr., N.V. Yakimchuk, Dr., National University of Food Technologies, Kiev
Materials of article relating to the definition of expenditure of energy associated with the movement of goods in the rigid and elastic systems, and the kinematic parameters as factors influencing to them. Equipment for binding the transport packages
(status, prospects and trends)
A.P. Bespalko, Dr., A.N. Gavva, Dr., S.V. Tokarchuk, Dr., National University of Food Technologies, Kiev
The indispensable and most important links in the supply chain "supplier of raw materials - manufacturer of products - the user finished products" are the sections of the formation of transport packages and their strong and reliable binding. This article provides an analysis of existing technologies, methods and equipment for binding the transport packages. Perspectives and trends of equipment for binding the transport packages consider from the standpoint of packaging equipment in general and the formation of new logistic schemes.
PracticeTubes
Legal consultation
Preparation of packers in NTU "KPI"
Barrier properties and how they measure
Labels on the packaging
On the bookshelf
Conferences LaboratoryMetal Packaging
(Properties and methods of measurement)
Short message serviceYellow pagesPrice-lists Advertising
|
